SuperView 820s Freeview Satellite Receiver Set-Up

With Smart BLIND SCAN, installation for the SuperView 820 satellite receiver couldn’t be easier. Enjoy crystal clear Freeview TV in no time.  There is NO NEED to enter any parameter, the receiver will take care of itself.  TOO EASY!

 


Step 1
Press Menu button on your remote to go to the Main menu page, select Installation then Blind Scan
 

  

 

Step 2
In Blind Scan screen, you DO NOT need to enter any parameter, like Satellite Name, LNB Freq, Start Freq, etc.  You may select FTA in Ch Type for quicker process, so the receiver will only scan Free To Air channels, as you won't be able to watch the Scramble program (Paid channels) anyway.  
 

 

Step 3
The receiver will first scans new TP (Transponder).  It finds new TP and asks you to scan each TP for new channels.
 

  

 

Step 4
The receiver will scan each TP, and automatically finds new channels.
Depending on location and signal strength, the search process will take around 4 to 10 minutes.  Once the process is done, save your setting.
Enjoy crystal clear Satellite TV.
 

  

 

Factory Default
If you have entered incorrect data, can not change them back, simply reset the receiver to Factory Default, then start the set up again from STEP1.

Sometimes if you do the initial set up when the weather is bad, signal is too weak to be detected. so maybe you can try again, when it is good weather.  Reset the box to Factory default again, then do a Blind Scan, see if you can get more channels.
 


See Installation Guide For Other Receiver